%
(1_WINKEL_SCHAUGLAS)
(T6  D=3.175 CR=0. - ZMIN=-3.5 - SCHAFTFRSER)
G90 G94 G17 G91.1
G21
(WHEN USING FUSION 360 FOR PERSONAL USE, THE FEEDRATE OF)
(RAPID MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING)
(MOVES, WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID)
(MOVES ARE AVAILABLE WITH A FUSION 360 SUBSCRIPTION.)
G53 G0 Z0.
(2D-TASCHE1)
M9
T6 M6
S12000 M3
G54
M8
G0 X74.816 Y11.605
G0 G43 Z15. H6
G1 Z5. F600.
G1 Z2.5
G2 X75.184 Y14.598 Z2.085 I0.184 J1.497 F200.
G2 X74.816 Y11.605 Z1.671 I-0.184 J-1.497
G2 X75.184 Y14.598 Z1.256 I0.184 J1.497
G2 X74.816 Y11.605 Z0.842 I-0.184 J-1.497
G2 X75.184 Y14.598 Z0.427 I0.184 J1.497
G2 X74.816 Y11.605 Z0.013 I-0.184 J-1.497
G2 X75.184 Y14.598 Z-0.402 I0.184 J1.497
G2 X75. Y11.593 Z-0.8 I-0.184 J-1.497
G1 X73.913 F600.
G2 X73.593 Y11.913 I0. J0.319
G1 Y14.087
G2 X73.913 Y14.407 I0.319 J0.
G1 X76.087
G2 X76.407 Y14.087 I0. J-0.319
G1 Y11.913
G2 X76.087 Y11.593 I-0.319 J0.
G1 X75.
G3 X73.157 Y10.458 I0. J-2.064
G2 X71.051 Y10.959 I-0.993 J0.501
G1 Y16.63
G2 X71.37 Y16.949 I0.319 J0.
G1 X78.63
G2 X78.949 Y16.63 I0. J-0.319
G1 Y9.37
G2 X78.63 Y9.051 I-0.319 J0.
G1 X71.37
G2 X71.051 Y9.37 I0. J0.319
G1 Y10.959
G3 X69.802 Y12.832 I-2.029 J0.
G2 X68.554 Y14.705 I0.78 J1.873
G1 Y19.
G2 X69. Y19.446 I0.446 J0.
G1 X81.
G2 X81.446 Y19. I0. J-0.446
G1 Y7.
G2 X81. Y6.554 I-0.446 J0.
G1 X69.
G2 X68.554 Y7. I0. J0.446
G1 Y14.705
G3 X67.047 Y16.913 I-2.371 J0.
G2 X65.591 Y19.154 I0.837 J2.138
G2 X69. Y22.413 I3.409 J-0.154
G1 X81.
G2 X84.412 Y19. I0. J-3.413
G1 Y7.
G2 X81. Y3.588 I-3.412 J0.
G1 X69.
G2 X65.588 Y7. I0. J3.412
G1 Y19.
G2 X65.591 Y19.154 I3.412 J0.
G2 X68.008 Y20.288 Z-0.839 I1.507 J-0.068 F200.
G1 X75.911 Y14.304 Z-0.956
G2 X75. Y11.593 Z-1. I-0.911 J-1.202
G1 X73.913 F600.
G2 X73.593 Y11.913 I0. J0.319
G1 Y14.087
G2 X73.913 Y14.407 I0.319 J0.
G1 X76.087
G2 X76.407 Y14.087 I0. J-0.319
G1 Y11.913
G2 X76.087 Y11.593 I-0.319 J0.
G1 X75.
G3 X73.157 Y10.458 I0. J-2.064
G2 X71.051 Y10.959 I-0.993 J0.501
G1 Y16.63
G2 X71.37 Y16.949 I0.319 J0.
G1 X78.63
G2 X78.949 Y16.63 I0. J-0.319
G1 Y9.37
G2 X78.63 Y9.051 I-0.319 J0.
G1 X71.37
G2 X71.051 Y9.37 I0. J0.319
G1 Y10.959
G3 X69.802 Y12.832 I-2.029 J0.
G2 X68.554 Y14.705 I0.78 J1.873
G1 Y19.
G2 X69. Y19.446 I0.446 J0.
G1 X81.
G2 X81.446 Y19. I0. J-0.446
G1 Y7.
G2 X81. Y6.554 I-0.446 J0.
G1 X69.
G2 X68.554 Y7. I0. J0.446
G1 Y14.705
G3 X67.047 Y16.913 I-2.371 J0.
G2 X65.591 Y19.154 I0.837 J2.138
G2 X69. Y22.413 I3.409 J-0.154
G1 X81.
G2 X84.412 Y19. I0. J-3.413
G1 Y7.
G2 X81. Y3.588 I-3.412 J0.
G1 X69.
G2 X65.588 Y7. I0. J3.412
G1 Y19.
G2 X65.591 Y19.154 I3.412 J0.
G1 Z15.
(WHEN USING FUSION 360 FOR PERSONAL USE, THE FEEDRATE OF)
(RAPID MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING)
(MOVES, WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID)
(MOVES ARE AVAILABLE WITH A FUSION 360 SUBSCRIPTION.)
(2D-TASCHE1 2)
M8
G0 X73.656 Y13.198
G1 Z15. F600.
G1 Z5.
G1 Z2.5
G2 X76.344 Y14.566 Z2.085 I1.344 J0.684 F200.
G2 X73.656 Y13.198 Z1.671 I-1.344 J-0.684
G2 X76.344 Y14.566 Z1.256 I1.344 J0.684
G2 X73.656 Y13.198 Z0.842 I-1.344 J-0.684
G2 X76.344 Y14.566 Z0.427 I1.344 J0.684
G2 X73.656 Y13.198 Z0.013 I-1.344 J-0.684
G2 X76.344 Y14.566 Z-0.402 I1.344 J0.684
G2 X73.656 Y13.198 Z-0.816 I-1.344 J-0.684
G2 X76.344 Y14.566 Z-1.231 I1.344 J0.684
G2 X75. Y12.374 Z-1.5 I-1.344 J-0.684
G1 X74.693 F600.
G2 X74.374 Y12.693 I0. J0.319
G1 Y13.307
G2 X74.693 Y13.626 I0.319 J0.
G1 X75.307
G2 X75.626 Y13.307 I0. J-0.319
G1 Y12.693
G2 X75.307 Y12.374 I-0.319 J0.
G1 X75.
G3 X74.082 Y11.895 I0. J-1.12
G2 X73.093 Y12.206 I-0.445 J0.311
G1 Y14.587
G2 X73.413 Y14.907 I0.319 J0.
G1 X76.587
G2 X76.907 Y14.587 I0. J-0.319
G1 Y11.413
G2 X76.587 Y11.093 I-0.319 J0.
G1 X73.413
G2 X73.093 Y11.413 I0. J0.319
G1 Y12.206
G3 X71.822 Y14.112 I-2.066 J0.
G2 X70.551 Y16.019 I0.794 J1.907
G1 Y17.13
G2 X70.87 Y17.449 I0.319 J0.
G1 X79.13
G2 X79.449 Y17.13 I0. J-0.319
G1 Y8.87
G2 X79.13 Y8.551 I-0.319 J0.
G1 X70.87
G2 X70.551 Y8.87 I0. J0.319
G1 Y16.019
G3 X69.538 Y17.9 I-2.253 J0.
G2 X70.151 Y19.946 I0.614 J0.931
G1 X81.
G2 X81.946 Y19. I0. J-0.946
G1 Y7.
G2 X81. Y6.054 I-0.946 J0.
G1 X69.
G2 X68.054 Y7. I0. J0.946
G1 Y19.
G2 X69. Y19.946 I0.946 J0.
G1 X70.151
G3 X72.376 Y21.429 I0. J2.41
G2 X74.601 Y22.913 I2.225 J-0.927
G1 X81.
G2 X84.912 Y19. I0. J-3.913
G1 Y7.
G2 X81. Y3.088 I-3.912 J0.
G1 X69.
G2 X65.088 Y7. I0. J3.912
G1 Y19.
G2 X69. Y22.913 I3.912 J0.
G1 X74.601
G1 Z15.
(WHEN USING FUSION 360 FOR PERSONAL USE, THE FEEDRATE OF)
(RAPID MOVES IS REDUCED TO MATCH THE FEEDRATE OF CUTTING)
(MOVES, WHICH CAN INCREASE MACHINING TIME. UNRESTRICTED RAPID)
(MOVES ARE AVAILABLE WITH A FUSION 360 SUBSCRIPTION.)
(2D-KONTUR1)
M8
G0 X82.912 Y13.
G1 Z15. F600.
G1 Z5.
G1 Z1.8 F200.
G1 Z-0.8
G1 Y7. F600.
G2 X81. Y5.088 I-1.912 J0.
G1 X69.
G2 X67.088 Y7. I0. J1.912
G1 Y19.
G2 X69. Y20.913 I1.912 J0.
G1 X81.
G2 X82.912 Y19. I0. J-1.913
G1 Y13.
G1 Z-1.6 F200.
G1 Y7. F600.
G2 X81. Y5.088 I-1.912 J0.
G1 X69.
G2 X67.088 Y7. I0. J1.912
G1 Y19.
G2 X69. Y20.913 I1.912 J0.
G1 X81.
G2 X82.912 Y19. I0. J-1.913
G1 Y13.
G1 Z-2.4 F200.
G1 Y7. F600.
G2 X81. Y5.088 I-1.912 J0.
G1 X69.
G2 X67.088 Y7. I0. J1.912
G1 Y19.
G2 X69. Y20.913 I1.912 J0.
G1 X81.
G2 X82.912 Y19. I0. J-1.913
G1 Y13.
G1 Z-3.2 F200.
G1 Y7. F600.
G2 X81. Y5.088 I-1.912 J0.
G1 X69.
G2 X67.088 Y7. I0. J1.912
G1 Y19.
G2 X69. Y20.913 I1.912 J0.
G1 X81.
G2 X82.912 Y19. I0. J-1.913
G1 Y13.
G1 Z-3.5 F200.
G1 Y7. F600.
G2 X81. Y5.088 I-1.912 J0.
G1 X69.
G2 X67.088 Y7. I0. J1.912
G1 Y19.
G2 X69. Y20.913 I1.912 J0.
G1 X81.
G2 X82.912 Y19. I0. J-1.913
G1 Y13.
G1 Z15.
M9
G53 G0 Z0.
M30
%